Underwater Boat Repairs & Marine Repairs
Introduction
Hull2Prop provides professional underwater repair services for boats, yachts, and commercial vessels throughout Florida.
Our commercial diving teams are equipped to perform a wide range of repairs while a vessel remains in the water. This can eliminate or reduce the need for a haul-out when the repair can safely and properly be completed underwater.
Our underwater repair capabilities include thruster and propeller work, trim tab repairs, mounting hardware replacement, thru-bolt replacement, anode mounting hardware, line cutter installation and service, and other underwater mechanical and structural repairs.
Every repair is evaluated based on the vessel, equipment, accessibility, water conditions, and specific repair requirements.
Underwater Boat Repairs
Hull2Prop can perform many types of mechanical and structural repairs underwater, including repairs that would traditionally require the vessel to be hauled out.
Common underwater repairs include:
- Thruster propeller replacement
- Bow thruster and stern thruster service
- Trim tab actuator replacement
- Trim tab replacement
- Swim platform mounting bracket replacement
- Thru-bolt replacement
- Underwater mounting hardware replacement
- Anode thru-bolt and mounting hardware replacement
- Line cutter installation and replacement
- Underwater hardware removal and installation
- Other underwater repairs
If you have an underwater repair that is not specifically listed above, contact Hull2Prop to discuss the vessel and the required work.
Thruster Repair & Replacement
Hull2Prop can perform underwater work involving vessel thrusters, including thruster propeller replacement and other accessible thruster repairs.
Our commercial divers can work on bow thrusters, stern thrusters, and other underwater thruster components depending on the vessel configuration and accessibility.
Underwater thruster services may include:
- Thruster propeller removal and replacement
- Thruster component replacement
- Underwater inspection
- Hardware removal and installation
- Repair and replacement of accessible underwater components
- Other underwater thruster service
Performing this work underwater may allow the vessel to remain in the water rather than requiring an immediate haul-out, depending on the specific repair.
Trim Tab Repair & Replacement
Hull2Prop performs underwater trim tab repairs and replacement on vessels where the components are accessible to our divers.
Services can include:
- Trim tab replacement
- Trim tab actuator replacement
- Removal and installation of underwater hardware
- Thru-bolt replacement
- Inspection of trim tab mounting hardware
- Other accessible underwater trim tab repairs
Our divers can evaluate the condition of the existing hardware and determine whether the repair can be completed underwater.
Swim Platform & Mounting Hardware Repairs
Hull2Prop can perform underwater repairs involving swim platform mounting hardware and other underwater brackets and attachment points.
Examples include:
- Swim platform mounting bracket replacement
- Thru-bolt replacement
- Underwater mounting hardware replacement
- Bracket removal and installation
- Inspection of underwater attachment points
- Replacement of corroded or damaged hardware where accessible
These repairs can be particularly useful when the vessel is in the water and removing the vessel from service for a haul-out is undesirable.
Thru-Bolt & Underwater Hardware Replacement
Hull2Prop can remove and replace underwater thru-bolts, fasteners, mounting hardware, and other accessible underwater components.
Thru-bolts and underwater fasteners may be used for a variety of components on a vessel, including mounting brackets, anodes, trim tabs, swim platforms, and other underwater equipment.
Our commercial divers can remove existing hardware and install replacement components using specialized underwater tools and equipment.
The exact repair method depends on the vessel’s construction, hardware configuration, accessibility, and condition.
Line Cutter Installation & Service
Hull2Prop installs, removes, services, and replaces marine line cutter systems designed to help protect propellers and running gear from lines, rope, nets, weeds, and other underwater debris.
Line cutter services can include:
- New line cutter installation
- Underwater line cutter installation
- Line cutter removal
- Line cutter replacement
- Blade replacement
- Hardware replacement
- Inspection and maintenance
- Annual maintenance and service
- Underwater repair of accessible line cutter components
Hull2Prop can work with several commonly used marine line cutter systems, including:
Military & Commercial Diving
Piranha Dual Line Cutters
The appropriate system depends on the vessel’s propulsion configuration, shaft size, propeller, available clearance, and other installation requirements.
Specialized Underwater Tools & Equipment
Performing repairs underwater requires specialized equipment that is different from the tools normally used during an above-water repair.
Hull2Prop’s commercial diving teams utilize specialized underwater tools and equipment, including hydraulic and battery-powered equipment designed for underwater work.
Depending on the repair, our equipment may allow divers to perform cutting, drilling, fastening, removal, installation, and other mechanical operations while the vessel remains in the water.
This specialized equipment allows our dive teams to perform a wide range of underwater repairs while working in the confined and challenging conditions found beneath a vessel.
Repairs Performed Without a Haul-Out
One of the primary advantages of underwater repair is the ability to address certain problems without removing the vessel from the water.
When conditions allow, Hull2Prop can perform repairs directly at the vessel’s dock, marina, mooring, or other accessible location.
Avoiding a haul-out may reduce vessel downtime and eliminate the need to coordinate a travel lift, dry-storage space, yard scheduling, and other logistical requirements associated with removing a vessel from the water.
Not every repair can or should be performed underwater. Hull2Prop evaluates each repair individually and will advise the customer when an above-water repair or haul-out is necessary.
Underwater Repair For Boats, Yachts & Commercial Vessels
Hull2Prop provides underwater repair services for a wide range of vessels, including:
- Recreational boats
- Motor yachts
- Sportfishing vessels
- Sailing vessels
- Commercial vessels
- Charter vessels
- Workboats
- Government vessels
The repair approach depends on the vessel, equipment configuration, water conditions, and specific scope of work.
For larger or specialized commercial and government diving requirements, Hull2Prop also provides dedicated commercial and military diving services.
Underwater Repair Throughout Florida
Hull2Prop provides underwater repair services throughout our Florida service area.
Our commercial dive teams service vessels throughout Southwest Florida, Tampa Bay, Sarasota and Bradenton, Fort Myers, Naples, Marco Island, and other coastal Florida markets.
For specialized commercial, government, or larger-scale underwater repair projects, contact Hull2Prop to discuss the specific location and scope of work.
Frequently Asked Questions
Yes. Hull2Prop specializes in underwater repairs and can complete many repairs while the vessel remains in the water. Whether a particular repair can be completed underwater depends on the vessel, repair, accessibility, and condition.
Yes. Hull2Prop can perform underwater thruster propeller removal and replacement when the vessel configuration and repair allow the work to be safely completed underwater.
Yes. Hull2Prop can perform underwater trim tab actuator replacement and other accessible trim tab repairs.
Yes. Hull2Prop can remove and replace accessible swim platform mounting brackets and associated underwater hardware.
Yes. Hull2Prop can replace certain underwater thru-bolts and mounting hardware, including hardware associated with trim tabs, swim platforms, anodes, brackets, and other underwater components.
Yes. Hull2Prop can install, remove, replace, and maintain marine line cutter systems using commercial divers and specialized underwater tools.
Hull2Prop can work with several marine line cutter systems, including SPURS & Piranha systems, depending on the vessel and application.
Hull2Prop utilizes specialized underwater tools and equipment, including hydraulic and battery-powered equipment designed for commercial diving and underwater mechanical work.
Underwater repair pricing varies significantly depending on the vessel, repair, parts required, accessibility, diving conditions, equipment requirements, and total scope of work. Hull2Prop provides individual quotes based on the specific repair.
Need an Underwater Repair?
If your boat or vessel needs a thruster repair, trim tab replacement, mounting hardware replacement, line cutter installation, thru-bolt replacement, or another underwater repair, Hull2Prop can evaluate the problem and determine whether the work can be completed while the vessel remains in the water.
Contact Hull2Prop to discuss your underwater repair and request a quote.
Why Us
We pride ourselves in keeping our rates competitive, while maintaining the highest level of quality, service, and results.
Regularly scheduled hull cleanings and inspections increase performance, and can prevent expensive repairs later.
Regular Business Hours
Monday-Friday 8:00am-5:00pm
Saturday & Sunday closed
Fort Myers Office
17054 Alico Commerce Ct. Suite 7,
Fort Myers, FL 33967